Injector Power Up and Logging In

  1. Use a screwdriver to turn the latch on the front of the injector and open the door.
  2. Flip the breaker switch to the left as noted in the image below (red is on, green is off).
  3. Close the door and use a screwdriver to latch the door closed again.
  4. The screen will show the SafeTraces logo. It may take several minutes to start the injector software.
  5. Once the main screen appears, tap “login” in the upper right. Enter your organization’s username and password to log in.
Can't find what you need? Contact us
Buy now